5 Common Exterior Painting Problems and Their Solution

Exterior painting problems mostly occur due to sunlight and UV rays. Painting the outside of a house is a great idea to make it look fresh and appealing. But many people face problems after some time. Several painting problems can ruin the look and lower the home’s value. Therefore, it is essential to fix these problems at the right time and save yourself from costly repairs down the line. Understanding the causes prevents future issues. This article explains five common exterior painting problems and how to solve them with simple steps.

Common Exterior Painting Problems in Singapore and Their Probable Solutions

If you want to fix exterior painting problems, locate the issues first. PS Painting Services Singapore explains some common exterior painting issues and their solutions to enlighten homeowners’ knowledge about exterior painting. Moreover, they offer professional interior painting, exterior painting, and complete house painting services in Singapore at the most affordable prices. Let’s read their guide to know the solution of exterior painting problems.

1. Peeling Paint

Peeling happens when paint loses grip on the surface. Moisture and poor preparation can cause this problem. If water gets under the paint, it lifts off and peels away. Harsh weather can add fuel to this fire by speeding up this issue. This quickly damages the complete paint within no time. 

Solution

Remove loose paint with a scraper. Sand the area to smooth rough spots. Clean with a damp cloth to remove dust and debris. Apply a high-quality primer that resists moisture to prepare the surface for a fresh coat. Let it dry completely before applying two coats of durable exterior paint. Choose weather-resistant paint to prevent peeling in the future.

2. Blistering Paint

Blisters appear as bubbles on the paint surface. This happens when heat or moisture gets trapped under the surface. Painting in direct sunlight, high humidity, or wet surfaces can cause this issue. Poor ventilation also contributes to trapped moisture and causes blisters. Blisters burst and take the paint with them. This fastens the paint degradation and exposes the surface to weather elements. 

Solution

Pop a few blisters to check inside. If the surface underneath is dry, heat causes the issue. On the contrary, If it is damp, moisture is the reason. Remove bubbles with a scraper. Sand the surface properly to make it rough again. Clean the area and let it dry completely. 

Apply a primer that resists the conditions that cause blisters. Use high-quality paint suited for outdoor conditions. Moreover, painting time is also of great importance. Paint when the weather is cool and dry to avoid further blistering. 

3. Cracking Paint

Cracks start small but grow into bigger gaps over time. They make the house look unattractive and old. Low-quality paint, harsh weather, and too many coats are the basic reasons for cracking. Paint that dries too fast and lacks flexibility also results in cracks. Once cracks form, they expose the surface underneath. This makes way for the water to seep in, which worsens the problem.

Solution

The first step in solving this exterior paint problem is to scrape off cracked paint. Sand the area and remove loose particles. Apply a high-quality primer to seal the surface and make the foundation for a better painting. 

Use durable exterior paint and brush in the same direction for an even coat. Allow each coat to dry fully before applying the next. To prevent cracks, use flexible paint that expands and contracts with temperature changes.

4. Fading Color

Sunlight causes paint to fade over time. Dark colours lose brightness faster because they absorb more heat. Low-quality paint also fades quickly and makes the walls look dull and lifeless. Pollution, dust, and harsh weather conditions increase fading.

Solution

Choose high-quality paint with UV protection to slow fading. Moreover, it is better to choose lighter shades that last longer because they reflect sunlight instead of absorbing it. Apply a protective clear coat to extend the paint’s life. 

Furthermore, regular maintenance and cleaning are the key to removing dirt and dust buildup, which makes colours look dull. Choose the paint quality thoughtfully to experience an enhanced paint life. 

5. Mildew and Mold

Dark spots and patches on walls indicate mould growth. Poor ventilation creates the perfect conditions for mould. Due to inadequate ventilation, moisture remains trapped inside the room and provides an ideal breeding ground for moulds. If you leave it untreated, it spreads, damages the paint, and weakens the surface. Humid climates and areas with poor drainage face this issue more often.

Solution

Wash the area with a mix of water and mild detergent. Use a soft brush to remove stains. Let the surface dry fully before painting. Apply a mold-resistant primer to prevent future growth. Choose paint with anti-mildew properties for long-lasting protection. Improve ventilation around the house to avoid moisture build-up.

Conclusion

Exterior painting problems happen due to weather, moisture, poor preparation, and low-quality materials. Fixing these issues early is essential to keep the house looking fresh and prevent costly repairs. Use the right materials and follow proper steps to make the paint last longer. Regular maintenance is important to prevent future damage.

Frequently Asked Questions