A drywall is a popular material for walls and ceilings, and if you notice, you should fix small holes in drywall to keep it looking pristine. Drywall is an economical solution to the walls and ceilings in Singapore. However, small holes can appear from nails, picture hooks, or minor accidents.
However, it is fortunate that they are not so difficult to fill these holes. In this guide, we’ll walk through the process step by step to help DIY enthusiasts and professionals fill the small holes in drywalls.Â
Method to Fix Small Holes in Drywalls
The method to repair small holes in drywall is straightforward and uses a few basic tools and techniques. Therefore, PS Painting Singapore has come up with a wonderful step-by-step approach to patch small holes in drywall.
Apart from the small holes in drywall fix, PS Painting Singapore also offers office painting, room painting, and wall painting services in Singapore. Read this and the subsequent section to fix small holes in drywall in Singapore efficiently. Â
Material Details
To repair small holes in drywall, you’ll need a few basic materials:Â
- Spackling paste
- A putty knife
- SandpaperÂ
- Primer and paint
However, if the hole is larger, use a drywall patch specifically designed to cover bigger patches. You can find these supplies at any hardware store.
How to Fix Small Holes in Drywall?
This section explains the step-by-step process to repair the small holes in drywall.
1. Prepare the Area
Before you start, it’s important to clean the area around the hole. Remove all the dust and ensure the surface is clean enough to absorb the paste or repair the patch efficiently. If there are loose pieces of drywall, gently scrape them off to prepare the surface properly. Sanding the edges to smooth them is not necessary for small holes, but it is essential for larger holes.Â
2. Apply the Spackling Paste
When you clean the area, it’s time to apply the spackling paste. Take a small amount of the paste onto your putty knife and press it into the hole. The quantity of the paste depends on the size of the hole.Â
However, you must overfill the large holes to compensate for the sinking mechanism. Afterward, use a putty knife to smooth out the compound and balance it with the rest of the wall. If you use a patch for larger holes, apply it first, then cover it with the spackling paste.
3. Let the Paste DryÂ
When you fill the hole with an appropriate quantity of the paste, let the paste dry completely. The drying time may vary from compound to compound and for different brands. Manufacturer’s instructions are crucial in this regard.Â
However, generally consider 1 to 2 hours of drying time to let the paste settle completely. It’s crucial to let it dry fully before moving on to the next step; otherwise, it could cause issues when sanding.
4. Sand the Surface
When the paste dries completely, sand the area until the patched area is smooth and flush with the surrounding wall. However, it is essential not to sand the surface over, as this could create indentations. After sanding, clean the area properly.
5. Prime and Paint
The last step in the process is to prime and paint the repaired area. Priming is important because the spackling compound can absorb paint differently than the rest of the wall. This can highlight the spot after painting.Â
Therefore, apply a thin coat of primer and allow it to dry. When the primer is dry, paint over the area using the same colour as the rest of the wall. You may need to apply two coats of paint to get the best result.
Conclusion
In conclusion, it is a straightforward process to fix small holes in drywall, but you need to have the right tools. All you need to do is clean and prepare the area before the repair and put some repair patches or paste, depending on the hole size.
Let the paste dry, then prime and paint the surface to make it even with the rest of the wall. If you ignore tiny holes in drywall, termites may wear a bigger patch. Therefore, it is essential to identify and fix the small holes in the drywall.Â