Want to transform your bathroom look and upgrade it to a more modern one? You don’t need to invest heavily in aesthetics, as painting the bathroom tiles is all you need. When you paint the tiles with the matching colour, it drastically improves the look of your bathroom while costing you much less than a full upgrade. The best part? We’re making it even more affordable for you by teaching you how to paint bathroom tiles in Singapore.
How To Paint Bathroom Tiles In Singapore?
Painting bathroom tiles in Singapore is indeed possible. But before we walk you through the guide for bathroom tile painting, make sure you have the following ready:
Things Required For the Paint:
Get these ready:
- Tile cleaner – You’ll need it for cleaning off the dirt, grime and mildew.
- Sponge or scrub brush – Required to scrub tiles clean.
- Sandpaper (220–400 grit) – Scuffs tiles so paint sticks.
- Painter’s tape – Covers edges and fixtures.
- Drop cloth or plastic sheet – Protects the floor from drips.
- Bonding primer – Makes paint stick to glossy tiles.
- Epoxy or tile paint – Durable paint for wet areas.
- Paint tray – Holds and spreads paint easily.
- Foam roller – Smooth finish on flat surfaces.
- Small paint brush – For corners and grout lines.
- Sealant (optional) – Adds a protective topcoat.
- Gloves and mask – Keeps hands safe and blocks fumes.
Steps To Paint Bathroom Tiles In Singapore:
Have you got all these required things ready? Great, these are the steps that you need to follow for painting tiles of the bathroom in Singapore:
1. Clean the Tiles Thoroughly
If you’re doing it for the first time, you should know that painting tiles that are dirty, covered in grime, or mildew won’t work. The dirt won’t let the paint stick firmly on the tiles, which will make it peel off in no time. For that reason, get any brush and sponge and then veal out any grime, mould, and dirt that you can see. To avoid this, clean the tiles thoroughly with a sponge or brush, removing soap scum, grime, mold, and dirt. After cleaning, let the tiles dry before going ahead with the other steps.
2. Lightly Sand the Surface
Bathroom tiles are usually glossy and smooth, which gives a tough time to the paint to stick to them. For that reason, get 220-400 grit sandpaper and gently sand the surface of the tiles. Don’t worry, you’re not destroying them but making the surface a little rough so that the paint can easily stick to it.
3. Tape Off the Edges and Fixtures
Spilling paint everywhere, even in places you didn’t want to paint, is common for beginners. Consequently, get any tape and then tape off all those edges and the fixtures that you don’t want the paint to stick on it.Â
4. Protect the Floor
Just like you saved the fixtures and edges from getting painted, you need to do the same for the floor. But obviously, you won’t have enough tape to cover the entire floor. Get any cloth and then lay it down on the floor. Its size has to be big enough to cover the floor area. If you don’t have such a big cloth, then using the plastic sheet is also a good idea.
5. Apply a Tile Bonding Primer
Applying a primer on the tile’s surface is important because it gives your paint a solid grip. For that reason, take a bonding primer and apply it to the tiles. Make sure you use a foam roller for big sections and a brush for the edges. After applying the primer, let it dry for some time before applying the paint.
6. Start Painting the Tiles
The main part now begins, which is to paint the tiles. Take a tile-safe paint and roll it on in thin, even coats. Usually, two coats will do the job and provide a great finish. However, you should always follow the instructions on the paint can, as they can vary from paint to paint. Add coats as many times as the instructions say. When you apply one coat, let it dry before applying another.
7. Let the Paint Dry Completely
Don’t use the bathroom till the paint gets dry. Don’t be impatient. The paint may take up to 24 to 48 hours due to the humidity in the country. Make sure that during that time, you don’t spill water or put your feet on the tiles so that the paint can get enough time to stick firmly.
8. Add a Sealant (Optional but Helpful)
If you want the paint to last longer, then use a sealant that will protect it from moisture and water. It’s optional, but it’ll surely maintain your tile’s appearance and will also save you money in the long run.
Conclusion
How to paint bathroom tiles in Singapore? To paint bathroom tiles in Singapore, first clean the tiles thoroughly to remove all grime. Then sand the surface lightly so the paint sticks well. Tape off any edges or fixtures you don’t want painted. Cover the floor to catch drips. Apply a bonding primer and let it dry. Next, paint the tiles using epoxy or tile-safe paint in thin, even coats. Finally, let the paint dry completely for 24–48 hours before using the bathroom again.